This is the "less lean" CX bushing set up = two cone bushing kit. The Krank formula gives you less lean, it is not as responsive as the APS bushings. The two cone combo gives you a lot of turn but you have more options when tightening up the kingpin.
RipTide's highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! The effective range of control is from barely snug for the loosest feel to 2 full turns for the tightest feel. KranK will turn the same or less than the same durometer of other brands which is also a departure from APS and WFB. As for washers, flat washers work great with this compound, but for the greatest control and range of this performance feature, use cupped, precision flat or precision cupped washers.
Why buy Krank?
In the Carver CX trucks the Krank formula gives you less lean. If you are a heavier skater then the 96a will give you more options, you can krank the kingpin nut down to make your ride more stable. If you are into more pumping and speed and less surfskate carve then Krank is a good choice. If your board is wigging out on the pumptrack, and it is out of control at speed or you need more feedback/resistance on the banks then buy Krank. There is no nicer feeling than banking hard on the pumptruck and feeling a bit of resistance to get that fast exit speed. Mmmmmm speed.
SPECS:
One cone 0.56" (Road-Side) and one 0.65" cone (Board-Side)
Krank can be made harder by tightening the King Pin nut
91kg+ Duro range is Medium 96a to Loose 90a bushings.
90kg to 77kg Duro range is Hard/Tight is 93a, Medium is 90a and Loose is 87a.
76kg to 64kg Duro range is Hard/Tight is 90a, Medium is 87a and Loose is 84a.
63kg to 45kg Duro range is Hard/Tight is 87a, and Medium is 84a.
Choosing a selection results in a full page refresh.
