Skip to product information
← Previous productNext product →

RipTide KranK FatCone 0.6" skateboard bushings

$24.00
$24.00
Duro

RipTide KranK FatCone 0.6" skateboard bushings

**Sold as set of 2 **

Sold as Pair with Large Flat Washers and Sticker. 

FatCones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go. 

The Barrel / FatCone setup is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. 

    The flat washer is to replace the cupped washer under the barrel bushing. If you are looking for more turn, remove the washer. The washer restricts the bushing.

    .975" Dia x .60" High (24.77mm Dia x 15.24mm High)

    • Ride a couple of points softer than they test, so order accordingly
    • 91kg+ Duro range is Tight 96a to Loose 90a bushings.
    • 90kg to 77kg Duro range is Hard/Tight is 93a, Medium is 90a and Loose is 87a.
    • 76kg to 64kg Duro range is Hard/Tight is 90a, Medium is 87a and Loose is 84a.
    • 63kg to 45kg Duro range is Hard/Tight is 87a, and Medium is 84a.
    • Excellent when used as a Barrel/FatCone combo - but incredibly fun and variable when used in the Roadside position in combo with other shapes & or duro's in the Boardside position.

    PLEASE NOTE:  The KranK Formula has quite a bit of adjustability - so order accordingly!  You can tighten the kingpin nut up to two full turns to 'harden' or 'loosen' the duro.