Eternal Blank skateboard deck

Eternal Blank skateboard deck

Need a blank deck to shred? Sick of paying for logos? Or maybe you want to create your own art?
Eternal blank skate deck is what you want! 

These decks come in a range of colours, if colour is important, please specify in the checkout notes what colour you would prefer.

These decks are made by an Australian brand called Eternal. They are pressed with 100% North American Maple - 7 Plys of top shelf maple. 

Notes on using deck for art
This is not a raw deck, which means it has been vanished to protect the wood. Research up the best technique for what you want to do. Generally if you are going to putting down some art or graphics then sand the deck back to remove the varnish, we suggest 220 grit sand paper. Or you can start at a lower grit and work up to finishing with 220. Then seal the deck with sanding sealer, let dry for 24 hours. One coat should be enough, if you want two coats then sand back with 220 grit and reapply. Now you need a primer coat. This is the base you are going to put your art/graphic on. Choose an acrylic one. If you are doing a full dip style graphic then spray paint the whole deck top and bottom. If the graphic is only going on the board, then masking tape out the edges (rails) for a more pro finish. Wait 24 hours after primer. Now you are ready to do your art. Use acrylic paints, they dry faster. Once art is down you want to apply a lacquer clear coat to protect the art. Once clear coat is on, let it sit for a few weeks to harden, that is the annoying part because you want to just set it up and rip. However you get a better deck if you wait until that clear coat is rock hard.