Riptide Ownboard Dual Kingpin Board Bushing Box

Riptide Ownboard Dual Kingpin Board Bushing Box

RipTide

$135.00

Duro

Quantity

This kit is designed for Ownboard electric skateboards that use dual kingpin trucks.

For simplicity, I will refer to the bushing positions from Board-Side to Road-Side. So for the front, Front 1 is the bushing closest to the board while Front 4 is the bushing closest to the road. The Primary turning pair of bushings are Front 3-4 and Back 3-4 (Board-Side Pair) bushings while the Secondary turning pair of bushings are Front 1-2 and Back 1-2 (Road-Side).

We found the key to settling down your trucks is to keep the pair of Secondary bushings stiffer than the Primary bushings. When adjusting compression, start with the Secondary bushings first. The primary pair should initiate the turn, then the secondary pair should come into play when needed or wanted. This box setup provides agility and stability for your board.

Pivot Cups Fit perfectly in these trucks and help provide a smoother and quieter truck.

Ownboard	Bushings	Washers
Front 1	KranK 93a FatCone 0.6"	Large Flat Washer
Front 2	KranK 93a Street Barrel 0.5"	Small Flat Washer
Front 3	KranK 90a Barrel 0.6"	Small Flat or Large Cup Washer
Front 4	KranK 90a Street Barrel 0.5"	Small Flat Washer
Center	4 Indy pivots & 90a Street Cone 0.5"
Rear 1	KranK 93a Chubby 0.6"	Large Flat Washer
Rear 2	KranK 93a Street Barrel 0.5"	Small Flat Washer
Rear 3	KranK 93a Barrel 0.6"	Small Flat or large Cup Washer
Rear 4	KranK 93a Street Barrel 0.5"	Small Flat Washer

Be the first to know when this product is back in stock!

Riptide Ownboard Dual Kingpin Board Bushing Box

You are already on email notification for this product

Your email address is used one time only and then deleted... unless you signup to Hop's weekly email list